Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
Configuring ATM Half-Bridge Services
2-10
308611-14.00 Rev 00
Next, you must configure BootP to define a forwarding path between a router and
a BootP/DHCP server on the network.
Configuring a DHCP/BootP Relay Agent
To allow the AHB router to successfully forward DHCP packets from CPE hosts
to a DHCP server on the network, you must configure a BootP relay agent on both
the unnumbered ATM/IP interface and an associated numbered interface. AHB
does this automatically when you add AHB to the ATM service record. You also
must define a forwarding path between the AHB router and a DHCP server on the
network. You establish this forwarding path using one or both of the following
methods:
Configure one or more BootP forwarding IP interfaces on the router.
You define one IP interface to receive DHCP request packets from the remote
CPE hosts and another to transmit (broadcast) DHCP request packets to the
DHCP server.
Configure one or more BootP preferred servers on an IP interface on the AHB
router.
You define one IP interface to receive DHCP request packets from the remote
CPE hosts and to then unicast the requests directly to the DHCP server.
Creating a BootP Relay Agent Forwarding Interfaces
You create a BootP relay agent forwarding table for the IP interfaces that you
configure to receive the incoming DHCP request packets and to forward the
outgoing DHCP request packets to the DHCP server on the network. The BootP
relay agent forwards DHCP request packets based on the IP addresses of the
interfaces in this table. For more information about configuring a forwarding
table, refer to Configuring SNMP, BootP, and DHCP Services.
Note:
Following the recommendation of the ATM Forum, virtual channel
identifiers from 0 to 31 are reserved for signaling and added functionality.
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 93 94

Comentarios a estos manuales

Sin comentarios