Avaya Configuring ATM Half-Bridge Services Manual de usuario descargar pdf (Pagina 77)

AHB, BootP/DHCP, IP, and ATM Parameter Descriptions

308611-14.00 Rev 00

A-21

Parameter: Enable/Disable

Path: Configuration Manager > Protocols > ATM > Service Records

Default: Enable

Options: Enable

Disable

Function: Enables or disables this service record.

Instructions: Accept the default, Enable, if you want traffic to flow on this service record and

its VCs. Set to Disable if you do not want traffic to flow on this service record or

any of its VCs.

MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.2.1.2

Parameter: Data Encapsulation Type

Path: Configuration Manager > Protocols > ATM > Service Records > Add

Default: LANE (signaling enabled) or LLC/SNAP (signaling disabled)

Options: LANE

LLC/SNAP

NLPID

NULL

Function: Identifies the data encapsulation type for this service record.

You can use this parameter to select:

• LLC/SNAP, NLPID, or NULL data encapsulation for service records

containing PVCs

• LLC/SNAP data encapsulation for service records containing hybrid PVCs

• LANE for service records containing SVCs over which you want to run LAN

emulation

• LLC/SNAP or NULL for service records containing SVCs over which you

want to run classical IP (RFC 1577)

If you select NULL, the router interprets this as virtual, channel-based

multiplexing, which is not supported for bridging.

Instructions: Select a data encapsulation type.

MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.2.1.5

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 93 94

Sin comentarios

Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 77