Avaya Configuring ATM Half-Bridge Services Manual de usuario descargar pdf (Pagina 51)

Customizing AHB Services

308611-14.00 Rev 00

3-7

Enabling and Disabling Inbound Packet Filtering

By default, inbound packet filtering is disabled on the AHB router. This means

that AHB forwards bridge packets it receives from CPE hosts, regardless of

whether a table entry exists in the bridge table for that host.

When you enable inbound packet filtering on the AHB router, AHB verifies that

the source address in the IP packet is contained in the bridge table and that it

corresponds to the circuit and virtual connection identification number (VCID)

contained in the AHB bridge table. This is a check to ensure that the packets

received by the AHB router are valid.

To enable and disable inbound packet filtering on the AHB router, complete the

following tasks:

5. Set the

Debug Level

parameter. Click on

Help

or see the parameter description on

page A-4.

6. Click on

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

AHB

. The AHB menu opens.

4. Choose

Global

. The Edit ATM Half-Bridge Global

Parameters window opens.

5. Set the

Inbound Packet Filtering

parameter. Click on

Help

or see the

parameter description on page A-5.

6. Click on

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 93 94

Comentarios a estos manuales

Sin comentarios

Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 51

Comentarios a estos manuales

Relacionado con productos y manuales para Manuales de software Avaya Configuring ATM Half-Bridge Services