Avaya Configuring ATM Half-Bridge Services Manual de usuario descargar pdf (Pagina 59)

AHB, BootP/DHCP, IP, and ATM Parameter Descriptions

308611-14.00 Rev 00

A-3

The AHB global parameter descriptions follow.

Parameter: Enable

Path: Configuration Manager > Protocols > IP > AHB > Global

Default: Enabled

Options: Enable

Disabled

Function: Enables or disables AHB packet forwarding to and from ATM PVCs.

Instructions: Select Disable to disable AHB on this interface without deleting it. Select

Enable to reenable AHB services if you previously disabled it.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.13.1 #2

Parameter: Auto Learn Method

Path: Configuration Manager > Protocols > IP > AHB > Global

Default: None

Options: Secure

Unsecure

Both

None

Function: Specifies the method by which AHB dynamically learns new bridge entries on

the router.

Instructions: By default, the auto learn method is set to Both. This means that AHB will learn

new bridge entries either securely or unsecurely.

If you set the learning mode to Secure or Both, AHB learns new bridge entries

from the DHCP reply packets sent on the AHB-configured interface. Entries

learned in secure mode always take precedence over entries learned in unsecure

mode.

If you set the learning mode to Unsecure or Both, AHB learns new bridge

entries from IP and ARP packets received on the AHB-configured interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.13.1 #3

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 93 94

Sin comentarios

Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 59