
Using the Bay Command Console (AN/BN Routers)
5-8 117383-A Rev. A
5. Check values currently assigned to this object.
hssi/5/1# info
on box
state enabled
circuit-name H21
slot 2
connector 1
bofl enabled
bofl-timeout 1
mtu 4608
media dsthree
external-clock-speed 46359642
crc-size crc32bit
internal-clock-test disabled
bofl-number 5
bofl-length 100
receive-queue-length 0
transmit-queue-length 0
carrier-delay 0
loopback none
6. Determine what you can configure next in this context.
hssi/5/1# ?
Sub-Contexts:
ppp standard
Parameters in Current Context:
bofl crc-size name
bofl-length external-clock-speed on
bofl-number has receive-queue-length
bofl-timeout internal-clock-test slot
carrier-delay loopback state
circuit-name media transmit-queue-length
connector mtu
System Commands:
. . .
. . .
. . .
From this context in the active router configuration, you can add PPP or
Standard WAN protocol, or you can customize the current value assigned to
any parameter of the current object, hssi/5/1.
Comentarios a estos manuales