
Using the Bay Command Console (AN/BN Routers)
5-20 117383-A Rev. A
24. Add ARP to the IP interface, and verify the values that the BCC assigns
to parameters of ARP.
ip/192.168.9.1/255.255.255.0# arp
arp/192.168.9.1/8# info
on ip/192.168.9.1/255.255.255.0
state enabled
25. Go back to the root-level (box#) prompt.
arp/192.168.9.1/8# box
box#
26. Configure a synchronous interface on slot 5, connector 3.
box# sync 5/3
sync/5/3#
27. Add PPP to sync/5/3.
sync/5/3# ppp
ppp/5/3#
28. Add IP (address 192.168.10.1 with the Class C natural mask) to ppp/5/3.
ppp/5/3# ip 192.168.10.1 mask 255.255.255.0
ip/192.168.10.1/255.255.255.0#
29. Return to the root level (box#) prompt.
ip/192.168.10.1/255.255.255.0# box
box#
30. Return to the context of global IP.
box# ip
ip#
31. Configure BGP on global IP.
ip# /jointfilesconvert/88069/bgp
/jointfilesconvert/88069/bgp#
Comentarios a estos manuales