Avaya Bay Command Console (AN/BN Routers) Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
Using the Bay Command Console (AN/BN Routers)
2-8 117383-A Rev. A
Navigating with Configuration Commands
Using BCC configuration commands, you can
Move back to a previous context or level.
Move back to root (box) level.
Move forward to the next level.
Move from your current level to any other level in the device configuration
tree.
Moving Back One or More Levels
To move from your current working level back one or more levels closer to root
(box) level of the device configuration tree, enter the full BCC instance ID of the
desired object, as follows:
Example (go back one level)
rip/192.168.125.34# ip/192.168.125.34/255.255.255.224
ip/192.168.125.34/255.255.255.224#
Example (go back two levels)
rip/192.168.155.151# ethernet/2/1
ethernet/2/1#
In the second example, the BCC searches back (toward root) automatically until it
finds a context or level where the object you specified (in this case, ethernet/2/1)
exists in the router configuration tree. The BCC enters the context of this object,
and the command-line prompt displays your new location.
Moving Back to Root (box) Level
You can move back to root level in configuration mode by entering the object
name, box.
ip/1.2.3.4# box
box#
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 139 140

Comentarios a estos manuales

Sin comentarios