Avaya Bay Command Console (AN/BN Routers) Manual de usuario Pagina 65

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 64
Entering Commands
117383-A Rev. A 3-9
box# ethernet
Required attribute "slot" was not specified for class: Ethernet.
Usage: "ethernet slot <value> connector <value>"
Or: "ethernet <slot>/<connector>"
The following commands are equivalent.
Using full syntax:
box# ethernet slot 2 connector 1
ethernet/2/1#
Using default (minimum) syntax:
box# ethernet 2/1
ethernet/2/1#
ethernet is the object you want to configure.
slot and connector are the required parameters of ethernet.
The ability to configure objects using only the values for required parameters is
the “minimum to configure” feature of the BCC. Typically, the BCC requires you
to enter the values but not the names of required parameters. In rare cases,
however, the BCC requires you to explicitly enter the name of a required
parameter along with its value. (The usage Help indicates the command elements
you need to enter.)
Using Abbreviated Syntax
You can abbreviate BCC commands in the following manner:
box# eth 2/1
This command is the same as either of the following two commands:
box# ethernet slot 2 connector 1
box# ethernet 2/1
The BCC completes or expands abbreviated object and parameter names when
you press Return.
Vista de pagina 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 139 140

Comentarios a estos manuales

Sin comentarios