
Using the Bay Command Console (AN/BN Routers)
5-14 117383-A Rev. A
6. Go back to the previous level in the configuration tree.
rip/192.168.5.1# back
ip/192.168.5.1/255.255.255.0#
7. Try to change the IP address of the interface.
ip/192.168.5.1/255.255.255.0# address 192.168.5.2
"address" attribute may not be modified
ip/192.168.5.1/255.255.255.0#
The address cannot be changed because it is a required attribute and part of
the instance identifier for IP on an interface.
To change the address assigned to this instance of IP, you must delete the
instance and add a new instance of IP with a new address on fddi/11/1, as
follows:
ip/192.168.5.1/255.255.255.0# delete
fddi/11/1#
When you delete IP from an interface, the BCC also deletes RIP from that
interface.
8. Add a new instance of IP (with the new address) to fddi/11/1.
fddi/11/1# ip 192.168.5.2/24
ip/192.168.5.2/255.255.255.0#
9. Exit BCC configuration mode, and then exit to the Technician Interface
prompt.
ip/192.168.5.2/255.255.255.0# exit
bcc> exit
Router1>
Comentarios a estos manuales