
Entering Commands
117383-A Rev. A 3-11
Specifying Multiple Parameter-Value Pairs
Within a specific context in configuration mode, you can
• Enter an object name and one parameter-value pair per command line.
• Enter an object name and multiple parameter-value pairs (each pair separated
by a space) on the same command line.
Example (one parameter-value pair per line)
box# ethernet 2/1
ethernet 2/1# bofl-retries 6
ethernet 2/1# bofl-timeout 7
ethernet 2/1# hardware-filter enabled
ethernet 2/1#
Example (multiple parameter-value pairs per line)
ethernet 2/1# ip address 1.2.3.4 mask 255.255.255.0 redirects off
ip.1.2.3.4/255.255.255.0# ospf area 2.3.4.54 hello-interval 5
ospf/1.2.3.4#
Command Operators
BCC command operators (also called methods) perform a named operation within
the current or specified configuration context. AN/BN routers support the
following command operators in BCC configuration mode with read-write
privileges (T
able 3-1).
Comentarios a estos manuales