Avaya Bay Command Console (AN/BN Routers) Manual de usuario Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
Using the Bay Command Console (AN/BN Routers)
3-6 117383-A Rev. A
Entering Comments
You can use a text editor (such as vi on a UNIX workstation) to add descriptive
comments to a BCC configuration file. Enter comments in the following format:
box#
<command>
;# comment
or
box# #comment
box#
<command>
Example
box# board slot 1 type andse;# 192.168.47.129 192.168.47.21
When you finish editing the file, save it on your workstation or PC. The comments
are for reference only.
The BCC does not use or retain any comments you enter
During a BCC configuration session with a Bay Networks device
When sourcing a configuration file that contains comments (refer to “Sa
ving
Commands on a Workstation,” later in this chapter)
For this reason, comments also do not appear in the output of any
show config
command.
System Commands
AN and BN (BLN/BCN) routers support all system commands described in
Appendix B.
For more detailed information about a specific command:
Enter help <command> at any BCC prompt (for example, help save).
Refer to the guide Using Technician Interface Software.
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 139 140

Comentarios a estos manuales

Sin comentarios