
Configuration Examples
117383-A Rev. A 5-19
18. Add OSPF area 0.0.0.0 to ip/192.168.8.1/255.255.255.0.
ip/192.168.8.1/255.255.255.0# ospf area 0.0.0.0
ospf/192.168.8.1#
19. Verify the values currently assigned to attributes of ospf/192.168.8.1.
ospf/192.168.8.1# info
on ip/192.168.8.1/255.255.255.0
state enabled
area 0.0.0.0
authentication {}
type broadcast
priority 1
transit-delay 1
retransmission-interval 5
hello-interval 10
dead-interval 40
poll-interval 120
metric 1
mtu 1
20. Add to the device configuration a new Ethernet interface on slot 13,
connector 3.
ospf/192.168.8.1# eth 13/3
ethernet/13/3#
The BCC searches back toward root (box) level to find a level where an
Ethernet interface can be configured.
21. Add IP (address 192.168.9.1 with the Class C natural mask) to
ethernet/13/3.
ethernet/13/3# ip 192.168.9.1/24
ip/192.168.9.1/255.255.255.0#
22. Add OSPF area 0.0.0.1 to ip/192.168.9.1/255.255.255.0.
ip/192.168.9.1/255.255.255.0# ospf area 0.0.0.1
ospf/192.168.9.1#
23. Go back to the previous level in the configuration tree.
ospf/192.168.9.1# back
ip/192.168.9.1/255.255.255.0#
Comentarios a estos manuales