Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 44)

Configuring Ethernet, FDDI, and Token Ring Services

3-6

305259-A Rev 00

Setting the BofL Interval

The BofL interval is the amount of time the router waits before disabling the LLC

interface when the link becomes unavailable and BofL is enabled.

By default, the BofL interval is 5 seconds. You can change the interval of BofL

messages to a value from 1 to 60 seconds.

Using the BCC

To change the interval of BofL messages, access an existing FDDI line service

and enter:

bofl-timeout

integer

is the timeout value expressed in seconds. You can enter any integer value

from 0 to 3600.

For example, to change the BofL interval to 10, enter the following command

sequence:

box#

fddi slot 11 connector 1

fddi/11/1#

bofl-timeout

Using Site Manager

To change the interval of BofL messages, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose a

FDDI

Connector.

The Edit Connector window opens.

2. Choose Edit Line. The Edit FDDI Parameters window

opens.

3. Set the

BofL Timeout

parameter. Click on

Help or see the parameter description on

page A-6

4. Click on

. You return to the Edit Connector window.

5. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 135 136

Comentarios a estos manuales

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring Ethernet, FDDI, and Token Ring Services