Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 136
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
BCC show Commands
305259-A Rev 00
B-3
show ethernet alerts
The
show ethernet alerts
command displays all circuits that are enabled but not up. Use
this display to identify interfaces that are not working.
This command allows for the following command filters (flags) and filter arguments:
The output includes the following information:
-circuit
<circuit_name>
Displays information about the specified circuit only.
-slot
<slot>
Displays information about the specified slot only.
<circuit_name>
Displays information about the specified circuit only.
Slot/Conn Slot location of the Ethernet module within the chassis and the
connector number.
Circuit Name of the circuit associated with this line.
Admin State Configured state of the Ethernet interface: Up or Down.
HW Address Line’s physical address. The driver assigns this address.
Operational State State of the line driver: Down, Init (initializing), Not Present (enabled
but not yet started), or Up.
The Not Present state occurs for several reasons. For example, the
link module may not be physically present in the chassis; the
software may be booting and has not yet initialized the driver
software; the slot may be running diagnostics; or there may be a
problem with the configuration.
Total Time Up/Down If the line is not up (Operational State does not equal Up), then
three dashes (---) appear. If the line is up (Operational State equals
Up), then the value appears in the form:
hh
h
mm
m
ss
s
where
hh
is hours,
mm
is minutes, and
ss
is seconds. For example,
the value might appear as
5h31m05s
. If the value is greater than 24
hours, it appears in the form:
dd
d
hh
h
mm
m
where
dd
is days,
hh
is hours, and
mm
is minutes. For example, the
value might appear as
2d10h15m
.
(continued)
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 135 136

Comentarios a estos manuales

Sin comentarios