Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 31)

Configuring Ethernet Services

305259-A Rev 00

2-7

The BofL timeout interval is 5 seconds by default. You can change the interval of

BofL messages to a value from 1 to 60 seconds.

Using the BCC

To change the interval of BofL messages on an Ethernet interface, access an

existing Ethernet line service and enter:

bofl-timeout

integer

is the timeout value expressed in seconds. You can enter any integer value

from 1 to 60.

For example, to set the timeout value to 10 seconds, enter the following command

sequence:

box#

ethernet slot 13 connector 1

ethernet/13/1#

bofl-timeout 10

Using Site Manager

To change the interval of BofL messages, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose an

XCVR

Connector.

The Edit Connector window opens.

2. Choose

Edit Line

. The Edit CSMA/CD Parameters window

opens.

3. Set the

BofL Timeout

parameter. Click on

Help

or see the parameter description on

page A-3

4. Click on

. You return to the Edit Connector window.

5. Click on

Done

. You return to the Configuration Manager

window.

Note:

In Site Manager, the BofL Timeout parameter is valid only if you set the

BofL Enable parameter to Enable.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 135 136

Comentarios a estos manuales

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 31

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring Ethernet, FDDI, and Token Ring Services