Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 129)

BCC show Commands

305259-A Rev 00

B-29

show token-ring summary

The

show token-ring summary

command displays the current configuration for all token

ring circuits or a specific circuit or slot.

This command allows for the following command filters (flags) and filter arguments:

The output includes the following information:

Avg. Pkt.:

Receive Average packet size (number of bytes divided by number of frames)

received without error.

Transmit Average packet size (number of bytes divided by number of frames)

transmitted without error.

Multicast:

Receive Number of packets received that are not unicast packets.

-circuit

<circuit_name>

Displays information about the specified circuit only.

-slot

<slot>

Displays information about the specified slot only.

<circuit_name>

Displays information about the specified circuit only.

Slot/Conn Slot location of the token ring module within the chassis and the

connector number.

Circuit Name of the circuit associated with this line.

Admin State Configured state of the token ring interface: Up or Down.

HW Address Line’s physical address. The driver assigns this address.

Operational State State of the line: Up, Down, Init (initializing), or Not Pres (enabled

but not yet started).

The Not Pres state occurs for several reasons. For example, the link

module may not be physically present in the chassis; the software

may be booting and has not yet initialized the driver software; the

slot may be running diagnostics; or there may be a problem with the

configuration.

(continued)

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 135 136

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 129