Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 110)

Configuring Ethernet, FDDI, and Token Ring Services

B-10

305259-A Rev 00

show ethernet summary

The

show ethernet summary

command displays the current configuration for all

Ethernet circuits or a specific circuit or slot. This command allows for the following

command filters (flags) and filter arguments:

The output includes the following information:

Avg. Pkt.:

Receive Average packet size (number of bytes divided by number of frames)

received without error.

Transmit Average packet size (number of bytes divided by number of frames)

transmitted without error.

Multicast:

Receive Number of packets received that are not unicast packets.

-circuit

<circuit_name>

Displays information about the specified circuit only.

-slot

<slot>

Displays information about the specified slot only.

<circuit_name>

Displays information about the specified circuit only.

Slot/Conn Slot location of the Ethernet module within the chassis and the

connector number.

Circuit Name of the circuit associated with this line.

Admin State Configured state of the Ethernet interface: Up or Down.

HW Address Line’s physical address. The driver assigns this address.

Operational State State of the line driver: Down, Init (initializing), Not Present (enabled

but not yet started), or Up.

The Not Present state occurs for several reasons. For example, the

link module may not be physically present in the chassis; the

software may be booting and has not yet initialized the driver

software; the slot may be running diagnostics; or there may be a

problem with the configuration.

(continued)

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 135 136

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 110