
Warning:
The
TFTP download and upgrade of the Flash memory on the IP Deskphone can take a
significant amount of time (possibly up to 10 minutes). Do not unplug or reboot the
IP Deskphone during the process.
The following procedure explains how to download the SIP Software from the Avaya Web
site.
Downloading SIP software for the IP Deskphone from the Avaya Web site
1. Go to
http://www.avaya.com/support
2.
Log on to the Avaya Web site with a valid Avaya User ID and Password.
The Support page appears.
3. Enter IP Deskphone type in the Knowledge and Solution Engine box.
4. Select SOFTWARE in the ALL TYPES scroll-down menu.
5. Press the gray arrow at the end of the Knowledge and Solution Engine box to
obtain the Search Results.
6. From the Search Results, select the appropriate version of the SIP software for
the IP Deskphone; for example, IP Phone 1230 Release
SIP12x004.01.03.00.bin.
7. Place the selected software on the provisioning server.
Perform the following procedure to convert the UNIStim software to SIP oftware on the
IP Deskphone.
Converting UNIStim software to SIP software using TFTP
1. Run the TFTP server (for example Tftpd32.exe).
2. Place software and configuration files in the folder of the TFTP server (for example
12xx.img F/W file and 12xx.cfg file) that contains the following lines:
Table 12: Sample 12xx.cfg configuration file
[FW]
DOWNLOAD_MODE
AUTO
VERSION SIP12x004.01.03.00.bin
FILENAME 12xx.img
3. Configure the IP Deskphone Device Settings TFTP IP address to the IP address
where your
TFTP server is running.
After you are finished the configuration, the IP Deskphone reboots and sends a
request to the TFTP server.
4. Select the Apply&Reset context-sensitive soft key to save the settings and reset
the IP Deskphone.
Upgrade and convert the IP Deskphone software
92 SIP Software for Avaya 1200 Series IP Deskphones-Administration November 2012
Comentarios a estos manuales