Avaya SIP Software 4.0 for 1200 Series Manual de usuario Pagina 85

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 324
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 84
Chapter 9: Upgrade and convert the
IP
Deskphone software
Introduction
This chapter describes how to upgrade an
Avaya 1200 Series IP Deskphone with UNIStim
software to SIP Software.
In order to upgrade an IP Deskphone with UNIStim software, first determine if you have the
minimum UNIStim software release on the IP Deskphone (062AC5L). If your IP Deskphone is
installed with the minimum version of UNIStim software, proceed to the section
Convert
UNIStim software to SIP software on the IP Deskphone on page 91. If your IP Deskphone
is not installed with the minimum version of UNIStim Software, proceed to the section Upgrade
to the minimum UNIStim Software on page 86.
To convert the firmware on the IP Deskphone from SIP to UNIStim, see the section
Maintenance on page 281.
Upgrade the SIP Software on the IP Deskphone
Use the following procedures to upgrade existing SIP
Software to new SIP Software on the
IP Deskphone.
Download the SIP software to the provisioning server
T
o download the SIP software, perform the following procedure.
Downloading SIP software for the IP Deskphone from the Avaya Web site
1. Go to
http://www.avaya.com/support.
2. Log on to the Avaya Web site with a valid Avaya User ID and Password.
The Avaya Support page appears.
3. Enter the IP Deskphone type in the Knowledge and Solution Engine box.
4. Select Software in the scroll down menu.
SIP Software for Avaya 1200 Series IP Deskphones-Administration November 2012 85
Vista de pagina 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 323 324

Comentarios a estos manuales

Sin comentarios