
e. Press the gray arrow at the end of the Knowledge and Solution Engine
box to obtain the Search Results.
f.
From Search Results, select the appropriate version of the UNIStim
software for the IP Deskphone; for example, IP Phone 1230 Release
062AC5L.
g. Place the selected software in the correct directory on the provisioning
server.
4. In the IP Deskphone Network Configuration menu, change the TFTP server
address, and enter the correct TFTP server address.
This can be the provisioning server as defined in the chapter
Configure the
provisioning server on page 33.
5. Select the Apply&Reset context-sensitive soft key to save the configurations and
reset the IP Deskphone.
The IP Deskphone downloads the software file. The display shows [FW]
reading….
If the download is successful, the display shows [FW] writing… and the blue LED
flashes.
After the software image is downloaded to the IP Deskphone, the display shows
[FW] finished..., the blue LED stops flashing, and the IP Deskphone resets.
The IP Deskphone registers to the TPS with the new software version.
If the upgrade is unsuccessful, see the chapterDiagnostics and troubleshooting on
page 285
in the section Download failures.
Follow the next procedure to download the minimum required version of UNIStim software
automatically through TFTP on bootup.
Downloading UNIStim software automatically through TFTP on bootup
1. Press the Globe/Services key on the IP Deskphone twice quickly.
If the admin password prompt appears, enter the password 26567*738.
The Local Tools menu appears:
Table 11: Local Tools menu
1. Preferences
2. Local Diagnostics
3. Device Settings
4. Lock Menu
2. Select 3. Device Settings
from theLocal Tools menu.
The Device Settings screen appears.
Upgrade and convert the IP Deskphone software
90 SIP Software for Avaya 1200 Series IP Deskphones-Administration November 2012
Comentarios a estos manuales