
# Command Description
23 sipapp <start | stop> Starts or stops the SIP application
24 sendunistim <xx xx....> Sends UNIStim message
25 rxunistim <on | off Displays UNIStim messages from the Core
26 txunistim <on | off Displays UNIStim messages to the Core from
the SIP
application
27 sendevent <0xmmm <0xnnn> Simulates an UNIStim event.
28 lcdparam Sets up LCD parameters for the IP Deskphone
29 audio <hs | hd | hf | off> Loopbacks audio to handset/headset/Handsfree
30 display <on | off> Turns all LCD and LED on or off
31 keypress <on | off> Turns all key presses on or off
32 clearlog
>clearlog<mngr_dest>
Clears content of the specified log file. The input
parameter specifies the type of logging
manager:
•
0 (default) — ECT-log file
• 1 — SIP-log file
If the input parameter is incorrect, the following
notification appears:
>clearlog: incorrect type of
manager <x>
33 removelog
>removelog<mngr_dest>
Removes the specified log file.
The input parameter specifies the type of logging
manager:
•
0 (default) — ECR-log file
• 1 — SIP-log file
If the input parameter is incorrect, the following
notification appears:
>removelog: incorrect type of
manager <x>
34 reset2factory >reset2factory Resets the IP Deskphone to the default setting.
See
Activating Reset to Factory Setting using
SSH_PDT on page 283
.
Diagnostics and troubleshooting
308 SIP Software for Avaya 1200 Series IP Deskphones-Administration November 2012
Comentarios a estos manuales