
If the number is lower than 062AC5L, see Upgrade UNIStim software to the minimum required
UNIStim software on page 89 and follow the instructions to upgrade an IP
Deskphone to the
minimum-required version of UNIStim software before you convert to SIP Software.
Upgrade UNIStim software to the minimum required UNIStim
software
Use either of the following two methods to upgrade UNIStim software.
1.
UFTP download initiated by the server if the server supports this method of
upgrading UNIStim software. Refer to the appropriate documentation for your Call
Server for instructions on using this method.
2. TFTP download on bootup.
If necessary, use the following procedure to configure the TFTP server.
Configuring the TFTP server
1. The Avaya 1200 Series IP Deskphone always executes the TFTP download at
bootup if a TFTP IP address is configured on the IP Deskphone after being initiated
by the telephony Call Server.
2. Go to the TFTP server and create the 12xx.cfg provisioning file. The 12xx.cfg
provisioning file is a clear text file. Create the provisioning file as shown in the next
table.
Table 10: Sample 12xx.cfg provisioning file
[FW]
DOWNLOAD_MODE FORCED
VERSION 0625C23
FILENAME 0625C23.bin
This configuration file forces the software download of 062AC5L.bin.
3.
Download and copy the software to the TFTP server directory.
To download the UNIStim software for the IP Deskphone from the Avaya Web site:
a. Go to
http://www.avaya.com/support.
b.
Log on to the Avaya Web site with a valid Avaya User ID and
Password.
The Support page appears.
c. Enter the IP Deskphone type in the Knowledge and Solution Engine
box.
d. Select SOFTWARE in the ALL TYPES scroll-down menu.
Upgrade to the minimum UNIStim Software
SIP Software for Avaya 1200 Series IP Deskphones-Administration November 2012 89
Comentarios a estos manuales