Avaya Connecting ASN Routers to a Network Manual de usuario Pagina 91

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 108
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 90
Troubleshooting Network Boot Problems
308652-14.00 Rev 00
A-9
Displaying the ASN’s Parameter Settings
Display the router parameter settings to determine
Whether the ASN is set to boot using a local boot image or a remote boot
image
Whether the ASN is set to configure using a local configuration image or a
remote configuration image
The configuration of the synchronous and Ethernet connectors
Enter the following Technician Interface command to display the ASN parameter
settings:
getcfg
The following sample responses show the default settings:
Boot Options
boot image=network
boot config=network
Netboot Parameters:
Slot 1:
COM11...EZ-Install
COM12...EZ-Install
XCVR21..None
XCVR22..None
XCVR31..None
XCVR32..None
Slot 2:
XCVR21..None
XCVR22..None
COM31...EZ-Install
COM32...EZ-Install
The
XCVR21/22/31/32
parameters show the current setting of the ASN’s
Ethernet connectors.
The
COM11/COM12
and
COM31/COM32
parameters show the current settings of
the ASN’s synchronous connectors.
Vista de pagina 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 107 108

Comentarios a estos manuales

Sin comentarios