Avaya Connecting ASN Routers to a Network Manual de usuario descargar pdf (Pagina 64)

Connecting ASN Routers to a Network

3-14

308652-14.00 Rev 00

Parameter: Connector Protocol Mask

Path: Configuration Manager > Protocols > Global Protocols > Net Boot >

Interfaces

Default: Point to Point

Options: Point to Point

Point to Point Internal Clock

Fr Relay Annexd

Fr Relay

Annexa

Fr Relay LMI

Function: During the boot process the router will configure the synchronous

interface to the specified protocol.

Instructions: Specify the desired protocol option.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.7

Parameter: Connector State

Path: Configuration Manager > Protocols > Global Protocols > Net Boot >

Interfaces

Default: Enable

Options: Enable

Disable

Function: Enables or disables the connector parameters. If you set this parameter to

Disable, the router cannot Netboot.

Instructions: If you do not want to use the settings on the Netboot Interfaces window,

select Disable. You must set this parameter to Enable to use any of the

other four parameters in the window.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.1

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 107 108

Sin comentarios

Avaya Connecting ASN Routers to a Network Manual de usuario Pagina 64