Avaya Connecting ASN Routers to a Network Manual de usuario descargar pdf (Pagina 81)

Setting Up an ASN as a Network Boot Client

308652-14.00 Rev 00

4-7

Enabling and Disabling Interfaces with ifconfig

To enable an ASN interface for the network boot process or to disable an interface

from the network boot process, use the following command formats:

ifconfig

[

-s

]

-disable

ifconfig

[

-s

]

-enable

Table 4-4 describes the

ifconfig

command arguments for enabling and disabling

interfaces for network booting.

ifconfig Command Examples

Configure the current interface for the default Netboot behavior.

ifconfig -d

Disable the second connector on Net Module 2 in slot 4 for Netbooting.

ifconfig -s4 -disable com22

Specify the IP address and subnet mask of the first Ethernet Netboot

interface on Net Module 1.

ifconfig xcvr11 21.3.5.62 255.255.255.255

Configure the IP address and Frame Relay DLCMI of the first

synchronous Netboot interface on Net Module 2.

ifconfig com21 21.3.5.62 -fr -annexa

Table 4-4. ifconfig Settings to Enable and Disable Netboot Interfaces

Setting Description

Specifies the slot that contains the interface you want to enable or

disable. The slot corresponds to the ASN slot ID, which can be 1

through 4. If you omit this argument,

ifconfig

uses the current slot.

Specifies the IP connector you are enabling or disabling for network

booting. Use the following format:

xcvr | com

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 107 108

Sin comentarios

Avaya Connecting ASN Routers to a Network Manual de usuario Pagina 81