Avaya Connecting ASN Routers to a Network Manual de usuario descargar pdf (Pagina 56)

Connecting ASN Routers to a Network

3-6

308652-14.00 Rev 00

Netboot and Directed Netboot Parameters

Parameter: Boot Image From Network

Path: Configuration Manager > Protocols > Global Protocols > Net Boot >

Global

Default: Disable

Options: Enable

Disable

Function: Enables or disables retrieval of the software image from the BOOTP

server the next time the router starts up.

Instructions: Set to Disable if you want to boot using the image in the router’s local file

system. This setting reduces the time it takes to boot the router and

eliminates using network bandwidth to obtain the image.

Set to Enable if

• You want the router to obtain the image from a BOOTP server and

you have already set up the network to support BOOTP service.

• You are upgrading the image on a number of routers. The routers can

then boot using a single image on the BOOTP server. You must

ensure that the directory name in the bootptab file matches the

location of the upgraded image before you boot the routers.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.1

Note:

Of the five parameter fields shown in Figure 3-2, the first two (Boot

Image From Network and Boot Config From Network) apply to both Netboot

and Directed Netboot. The last three parameters are for Directed Netboot only.

Note:

As an alternative to enabling the Boot Image From Network parameter,

you can use the Router Files Manager to transfer an upgraded image to the

ASN. To do this, delete the ASN’s software image file, compact the file

system, and copy the upgraded image file to the ASN. Use the Router Files

Manager to confirm that the upgraded image on the router is the same size as

that on the Site Manager workstation. This verifies that the file transfer was

successful.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 107 108

Sin comentarios

Avaya Connecting ASN Routers to a Network Manual de usuario Pagina 56