Avaya Connecting ASN Routers to a Network Manual de usuario descargar pdf (Pagina 46)

Connecting ASN Routers to a Network

2-8

308652-14.00 Rev 00

# "ASN.Boston."

:tc=general:

# This is the active definition for the ASN we are naming

# "ASN.Chicago."

ASN.Chicago:\

:ip=10.0.0.4:\

:T130=0x0004:\

:T129="/usr/cfg/ASN_Chic.cfg":\

:tc=general:

Figure 2-1. Sample

bootptab

File

Verifying Consistent BOOTP Service

You may want to configure a second workstation as a BOOTP server for backup

purposes. If you do so, make sure the two bootptab files match exactly. Also,

make sure that the image and string files are from the same software version.

Setting Up a TFTP Server

An ASN needs a network connection to a TFTP server to complete EZ-Install,

Netboot, or Directed Netboot. You configure a UNIX workstation as a TFTP

server by

• Setting up TFTPD (the TFTP daemon)

• Adding a TFTP user (for an HP 9000 only)

• Setting up static routes to routers (optional)

• Loading the changes into memory

When you set up the TFTPD server on a UNIX workstation, you can allow TFTP

to access the root directory and any subdirectory or restrict its access to a specified

directory or pathname.

Note:

A daemon is an unattended process (that is, one that runs in the

background). An application typically calls up a daemon to perform a standard

routine or service (in this case, TFTP).

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 107 108

Sin comentarios

Avaya Connecting ASN Routers to a Network Manual de usuario Pagina 46