Avaya Connecting ASN Routers to a Network Manual de usuario descargar pdf (Pagina 73)

Configuring Network Booting

308652-14.00 Rev 00

3-23

Click on OK.

The BOOTP Client Interface Table window now lists the client IP address and

DLCI number you added.

Click on Done to exit the window.

BOOTP Client Interface Parameters

Parameter: IP Address

Path: Configuration Manager > Select Protocols > IP > BOOTP > Relay Agent

Interface Table > Client I/F

Default: None

Options: Any valid IP address

Function: Specifies the IP address of the booting router that is using EZ-Install. This

parameter applies only to a Frame Relay group access PVC connection.

Instructions: Enter the IP address (in dotted decimal notation) of the booting router’s

interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.1.1.1.3

Parameter: DLCI Number

Path: Configuration Manager > Select Protocols > IP > BOOTP > Relay Agent

Interface Table > Client I/F

Default: None

Range: 16 to 1007

Function: Specifies the identification number of the upstream router’s PVC to the

booting router. The Frame Relay network uses the DLCI number to direct

data flow from the booting router to the upstream router.

Instructions: Enter the number in decimal format. Use the DLCI number assigned by

your Frame Relay service provider.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.1.1.1.2

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 107 108

Sin comentarios

Avaya Connecting ASN Routers to a Network Manual de usuario Pagina 73