
Troubleshooting
302272-A Rev. 00 C-27
# 1: 03/16/98 14:51:30.804 INFO SLOT 3 L2TP Code:
4
L2TP LNS IP Address 132.245.56.6 is up for slot 3.
The following example shows how you can display the configuration of the LNS
using commands that the L2TP script files support.
[2:1]$ show l2tp config
L2TP Configuration Information
------------------------------
IP LNS LNS Tunnel
State Address HostName Auth.
----- --------------- --------------- ----------
Nil 132.245.56.6 BayRS Disabled
Total of 1 LNS instances.
etc……………
When the dial-in user places a call and successfully establishes a connection, the
log should look like the following example.
[2:1]$ log -fftwi -t15:30
# 1: 03/16/98 15:32:26.816 INFO SLOT 3 L2TP Code: 6
Creating tunnel. LAC IP: 132.245.54.136, TID: 32951, LNS IP: 132.245.56.6
# 2: 03/16/98 15:32:26.847 INFO SLOT 3 L2TP Code: 7
Tunnel established. LAC IP: 132.245.54.136, TID: 32951, LNS IP:
132.245.56.6, T
ID: 24708
# 3: 03/16/98 15:32:27.128 INFO SLOT 3 L2TP Code: 9
Session established. SID: 1, TID: 24708, LAC IP: 132.245.54.136, LNS IP:
132.245
.56.6 Session (SID: 1, TID: 24708) uses line 300046, circuit 46
# 4: 03/16/98 15:32:27.140 INFO SLOT 3 PPP Code: 200
Link layer for line 300046:0 initializing for circuit 46.
# 5: 03/16/98 15:32:27.144 TRACE SLOT 3 L2TP Code: 11
Proxy LCP completed successfully, SID = 1, TID = 24708
# 6: 03/16/98 15:32:27.144 INFO SLOT 3 RADIUS Code:
14
RADIUS Authentication Request Message received from line 300046.
# 7: 03/16/98 15:32:27.144 TRACE SLOT 3 RADIUS Code: 45
Using RADIUS Authentication Server 10.250.20.9 found active.
Comentarios a estos manuales