Avaya Configuring and Troubleshooting Bay Dial VPN (DVS) Networks Manual de usuario Pagina 102

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 188
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 101
Configuring and Troubleshooting Bay Dial VPN Services
7-4 302272-A Rev. 00
h.
Enter the IP address of the RADIUS server to which this client will
connect, then click on OK.
This address must be a valid IP address of an actual RADIUS server.
Clicking on OK displays the RADIUS Server List, showing the list of
currently configured RADIUS servers.
i.
Specify the Primary Secret parameter.
j.
Select the mode for this server.
The default for the Server Mode is Authentication, although you can
specify Authentication, Accounting, or Both. Chose the appropriate
server mode. If your server is doing both authentication and accounting,
choose Both. If this server is doing dynamic IP pooling, select either Both
or Accounting.
k.
Accept the default values for all other parameters in this window,
then click on Done.
A message appears asking whether you want to save your changes. When
you respond, you return to the Dial VPN RADIUS window. Keep clicking
on Done until you return to the Configuration Manager window. The
RADIUS client configuration is now complete.
10.
If your Dial VPN network will use DHCP for dynamic IP address
allocation, configure DHCP services on the gateway router.
a.
Enable DHCP on the router by first enabling IP and BootP.
You can enable IP, BootP, and DHCP simultaneously. Be sure to set the
Pass Through Mode parameter to either DHCP or BootP and DHCP.
b.
Specify one or more interfaces to receive DHCPDISCOVER packets.
c.
Specify an interface to transmit DHCPDISCOVER packets.
Caution: The gateway and the RADIUS server must each be configured with
the same secret.
Note: There can be only one RADIUS proxy client per slot, and the slot must
contain serial ports configured for frame relay or PPP. Only one home agent
can be configured per frame relay or PPP interface.
Vista de pagina 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 187 188

Comentarios a estos manuales

Sin comentarios