
10-4 Resolving Problems
Troubleshooting
TCP/IP is being used to
connect to the switch and
the network is down
Contact the network
administrator.
TCP/IP is being used to
connect to the switch and
the network on the PC is not
properly configured.
Configure the network on the
PC. See Chapter 2 of the
Installation Guide.
“Communications error”
window appears with two
options:
“Retry the connection”
and “Cancel the
connection.”
The program attempts to
reconnect. If it does not
reconnect and you do not
select Cancel, the program
attempts to reconnect
again after thirty seconds,
offering the same options.
It tries again after 1 min., 2
min., 4 min., and so forth.
It continues trying to
reconnect indefinitely at
greater and greater
intervals, until it is
successful or until you
select Cancel.
The connection to the
DEFINITY system has
dropped.
Connect to DEFINITY system.
Starting/Connecting Problems
Problem Probable Cause Action
Comentarios a estos manuales