
Configuring ATM Services
A-56
117374-B Rev. 00
Parameter: Max Connection Control
Path: Configuration Manager > Protocols > ATM > Signaling AAL
Default: 4
Options: 1 to 20
Function: Specifies the SSCOP maximum connection control value. This value sets the
maximum number of times the sender can transmit a BGN, END, RS, or ER
PDU.
Instructions: Accept the default, 4, or enter a value from 1 to 20.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.8.1.13
Parameter: Max PD Before Poll
Path: Configuration Manager > Protocols > ATM > Signaling AAL
Default: 25
Options: 1 to 120
Function: Specifies the SSCOP maximum poll data (PD) value. This value sets the
maximum value of the poll data state variable before transmitting a POLL PDU.
The poll data state variable increments upon transmission of a sequenced data
(SD) PDU and resets to 0 upon transmission of a POLL PDU.
Instructions: Accept the default, 25, or enter a value from 1 to 120.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.8.1.14
Parameter: Max STAT PDU Elements
Path: Configuration Manager > Protocols > ATM > Signaling AAL
Default: 67
Options: Odd integers from 3 to 119
Function: Specifies the SSCOP maximum STAT PDU value. This value sets the maximum
number of list elements allowed in a STAT PDU.
The sending device uses the value of this parameter for segmentation purposes.
When the number of list elements exceeds this value, the STAT message
segments. As a general rule, the default value, 67, causes the STAT PDU to fill
six ATM cells using AAL 5.
Instructions: Accept the default, 67, or enter an odd integer from 3 to 119.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.8.1.15
Comentarios a estos manuales