Avaya IP Telephony Guía de configuración Pagina 94
- Pagina / 180
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
94 Chapter 5 Configuring VoIP trunks
P0993474 03
On Business Communications Manager Santa Clara
This procedure details actions that the installer performs to set up the Business Communications
Manager Santa Clara.
1 The installer sets up 3321 as the Control set for each VoIP line, so that the VoIP route can be
manually activated.
2 The installer sets the published IP address.
In this case the public data network (PDN) is connected to the LAN 2 connection, therefore,
the installer sets the published IP address to LAN 2. This is the address that devices on the
PDN will use to locate the system.
3 The installer configures the media for the system, using the following settings:
• The first preferred codec is set to G.729.
• Silence Compression is turned on.
• Jitter Buffer is set to medium.
4 The installer puts the first eight VoIP lines into line pool O.
Any line pool can be used as long as all of the lines in the pool are VoIP. The installer does not
set an access code for the line pool, because the access code would not work with fallback.
Instead, the line pool will be accessed using destination digits after the installer sets up PSTN
fallback.
5 For each set on the system (DNs 3321 to 3331), the installer gives the set access to line pool O.
6 The installer sets up a remote gateway for the Santa Clara Business Communications
Manager, using the following settings:
• Destination IP: 47.62.54.1
This is the published IP address of the Ottawa Business Communications Manager.
• QoS Monitor: Enabled
This must be enabled for PSTN fallback to function.
• Transmit Threshold: 3.0
This is a MOS value that ensures that the VoIP lines are used as long as the system can
provide moderate quality.
• Receive Threshold: 3.0
This is a MOS value that ensures that the VoIP lines are used as long as the system can
provide moderate quality.
• Destination Digits: 2
7 The installer sets up the VoIP schedule with these settings:
• Service: Manual
•Overflow: Y
Note: In this case, because the systems are on a CDP network, and the 2 is included in the
DN, this number will be absorbed before dialout.
- Business Communications 1
- Manager 3.0 1
- IP Telephony Configuration 1
- Trademarks 2
- Table of Contents 3
- Chapter 4 5
- Chapter 5 5
- 12 Tables 12
- Before you begin 13
- Symbols used in this guide 13
- Text conventions 14
- Acronyms 14
- Preface 15 15
- Related publications 16
- How to get help 16
- APAC (Asia Pacific) 17
- Technical Support - CTAS 17
- 18 Preface 18
- Chapter 1 19
- Introduction 19
- IP telephones and VoIP trunks 20
- Figure 1 Network diagram 22
- Telephones 23
- Gatekeepers on the network 24
- IP network 24
- Key IP telephony concepts 25
- Jitter Buffer 26
- QoS routing 27
- Chapter 2 29
- Prerequisites checklist 29
- Network devices 30
- Network assessment 30
- Resource assessment 31
- Keycodes 33
- Defining published IP address 35
- NetVision wireless telephones 37
- IP telephones 37
- Chapter 3 39
- Installing IP telephones 39
- 2 Select the General tab 41
- Choosing a codec 42
- Choosing a Jitter Buffer 43
- Before installing 43
- Using a 3-port switch 43
- to move forward 46
- Other troubleshooting tips 48
- Configuring DHCP 49
- IP telephony DHCP notes 50
- Checking IP server status 52
- Figure 7 IP Terminal status 53
- Using the Hot Desking feature 57
- Notes about Hot Desking 58
- Customizing feature labels 59
- Moving IP telephones 63
- Figure 15 i2050 Switch type 65
- Configuring NetVision records 68
- <http:/ 69
- /symbol.com> 69
- Testing the handset functions 71
- Changing a handset Name 72
- Configuring VoIP trunks 73
- Configuring media parameters 74
- Field Value Description 75
- Outgoing call configuration 76
- Figure 18 Trunk/Line data 77
- Configuring a remote gateway 78
- Configuring PSTN fallback 80
- Enabling PSTN fallback 81
- Setting up the VoIP schedule 82
- Configuring routes 82
- Figure 23 Add route dialog 83
- Figure 24 VoIP schedule 85
- Activating the VoIP schedule 87
- Turning on QoS monitor 87
- PSTN fallback metrics 88
- Incoming call configuration 89
- Making calls 95
- Connecting an i200X telephone 96
- Quality of Service Monitor 100
- Port settings 101
- P0993474 03 102
- Figure 33 Port Ranges 102
- Using a gatekeeper 103
- Notes about NPI-TON aliases 107
- Gatekeeper call scenarios 113
- Chapter 6 115
- WarehouseHead Office 116
- Appendix A 121
- Efficient Networking 121
- Network engineering 122
- LAN engineering examples 126
- WAN engineering 126
- (8 kb/s) 127
- Setting Non-linear processing 128
- Enough link capacity 130
- Not enough link capacity 130
- Further network analysis 131
- Reduce link delay 132
- Reducing hop count 132
- Adjust the jitter buffer size 133
- Reduce packet errors 133
- Routing issues 134
- Appendix B 135
- Silence compression 135
- Time -> 137
- Bandwidth -> 137
- Channel/Link Max 137
- Comfort noise 140
- Appendix C 141
- Network performance utilities 141
- Appendix D 143
- Interoperability 143
- Speech path setup methods 144
- Media path redirection 144
- Gatekeeper 145
- No feedback busy station 146
- Interoperability 147 147
- Using VLAN on the network 148
- Interoperability 149 149
- Symbol NetVision telephones 150
- Interoperability 151 151
- 152 Interoperability 152
- Appendix E 153
- Quality of Service 153
- 154 Quality of Service 154
- Measuring Intranet QoS 155
- Recording routes 156
- Adjusting Ping measurements 157
- Measurement procedure 158
- Quality of Service 159 159
- Traffic mix 160
- TCP traffic behavior 160
- Network Quality of Service 161
- Network monitoring 162
- Quality of Service parameters 162
- Fallback to PSTN 163
- 164 Quality of Service 164
- Glossary 165
- 166 Glossary 166
- Glossary 167 167
- 168 Glossary 168
- Glossary 169 169
- 170 Glossary 170
Relacionado con productos y manuales para Redes Avaya IP Telephony
Redes Avaya X.25 Manual de usuario
(148 paginas)
(148 paginas)
Redes Avaya BayRS Version 13.10 Manual de usuario
(104 paginas)
(104 paginas)
Redes Avaya Configuring BFE Services Manual de usuario
(180 paginas)
(180 paginas)
Redes Avaya Configuring IP Services Manual de usuario
(585 paginas)
(585 paginas)
Redes Avaya BCM1000 Manual de instalación
(90 paginas)
(90 paginas)
Redes Avaya BCM 4.0 Networking Guía de configuración
(758 paginas)
(758 paginas)
Redes Avaya Configuring IP Services Manual de usuario
(610 paginas)
(610 paginas)
Redes Avaya BCM3.x Manual de usuario
(28 paginas)
(28 paginas)
Redes Avaya Configuring IPX Services Manual de usuario
(250 paginas)
(250 paginas)
Redes Avaya V.34 Manual de usuario
(34 paginas)
(34 paginas)
Redes Avaya 1D5 aviso
(40 paginas)
(40 paginas)
Redes Avaya Configuring DLSw Services Manual de usuario
(272 paginas)
(272 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.058 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales