Avaya IP Telephony Guía de configuración descargar pdf (Pagina 54)

54 Chapter 3 Installing IP telephones

P0993474 03

Figure 8 IP Terminal status dialog

6 You can change the Codec or JitterBuffer settings for the terminal. The table below describes

the fields on this screen.

Table 13 IP Terminal Status fields

Field Value Description

DN Read-only This is the DN record that is assigned to this terminal.

Status Read-only This is the current status of the terminal.

Type Read-only This is the type of IP telephone assigned to this record (i2050, i2004,

i2002)

IP address Read-only This is the IP address assigned to this telephone

Codec Default

G.711-aLaw

G.711-uLaw

G.711 with VAD

G.729

G.729 with VAD

G.723

Specifying a non-default CODEC for a telephone allows you to

override the general setting. You might, for example, want to specify

a low bandwidth CODEC (g.729) for a telephone that is on a remote

or busy sub-net.

Refer to “Choosing a codec” on page 42.

F/W version Read-only

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 179 180

Sin comentarios

Avaya IP Telephony Guía de configuración Pagina 54