Avaya IP Telephony Guía de configuración descargar pdf (Pagina 86)

86 Chapter 5 Configuring VoIP trunks

P0993474 03

7 On the navigation tree, under the destination code schedule, click Normal.

The Normal schedule appears. It contains the same two fields as shown in the figure above.

a Change Use Route to the route you configured for your PSTN fallback line (the line to the

other system).

b Set the Absorbed length to All.

Figure 25 Normal schedule routing information

In this case, the user dials the destination code plus the DN. The destination code is

absorbed, but the system dials out the access number (1-XXX-XXX) before the DN digits.

8 Repeat these steps for your destination code 9.

a Under the destination code, select the Normal schedule.

b Specify the route you created for the local PSTN.

c Set the absorb length to 0.

d Repeat these steps for the VoIP schedule.

Note: This same process will be necessary if you are part of a Universal Dialing Plan

(UDP), where each system is assigned a private access code that is not part of the DN and

you want your users to be able to just dial the DN of the telephone they are calling. In that

case, you enter the private access code in the External # field, and that gets dialed out

before the DN.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 179 180

Sin comentarios

Avaya IP Telephony Guía de configuración Pagina 86