
Configuring PPP Services
3-32
308639-14.00 Rev 00
Using the BCC
The BCC does not allow you to configure these parameters.
Using Site Manager
To specify a CHAP secret, CHAP local name, CHAP authentication challenge
interval, and enable PAP fallback for this interface, do the tasks in the following
table.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose
PPP
. The Interfaces menu appears.
2. Choose
Interfaces.
The Interfaces window opens.
3. Choose
Lines
. The Lines window opens.
4. Set
CHAP Secret
. (See page A-24.)
5. Set
CHAP Local Name
. (See page A-24.)
6. Set
CHAP Periodic Timer
.
(See page A-25.)
7. Set
Enable PAP Fallback
.
(See page A-21.)
8. If you have no other PPP line parameters
to configure, click on
OK
. Otherwise,
continue with the Lines configuration.
The Interfaces window opens.
Comentarios a estos manuales