Avaya Configuring PPP Services Manual de usuario descargar pdf (Pagina 75)

Customizing PPP

308639-14.00 Rev 00

3-21

Using Site Manager

To set the interval between transmissions of echo-request packets on this interface,

do the tasks in the following table.

Specifying the Maximum Number of Configure-Request Packets

The Max Configure-Requests parameter specifies the maximum number of

unacknowledged configure-request packets that the router transmits before

assuming that the peer router on the other end of the link is unable to respond. The

link is then brought down. Valid acknowledgments include configure-ACK,

configure-NAK, or configure-reject packets. The default value is 10 packets.

Using the BCC

Navigate to the line prompt for the circuit and enter

max-configure-requests

seconds

For example, the following command sets the maximum number of

unacknowledged configure-request packets allowed to 5 on circuit 3/1.

line/3/1# max-configure-requests 5

Site Manager Procedure

You do this System responds

1. From the Protocols menu, choose

PPP

. The Interfaces menu appears.

2. Choose

Interfaces.

The Interfaces window opens.

3. Choose

Lines

. The Lines window opens.

4. Set

Echo-Reply Acceptable Loss

(See page A-15.)

5. If you have no other PPP line parameters

to configure, click on

. Otherwise,

continue with the Lines configuration.

The Interfaces window opens.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 151 152

Sin comentarios

Avaya Configuring PPP Services Manual de usuario Pagina 75