Avaya Configuring PPP Services Manual de usuario descargar pdf (Pagina 127)

PPP Parameters

308639-14.00 Rev 00

A-27

Parameter: Authentication Timer

Path: Protocols > PPP > Interfaces > Lines

Default: 10

Range: 1 through 1000 (seconds)

Function: Sets the time limit the router waits for a response to its authentication messages.

Instructions: Accept the default value, 10 (seconds), or enter an integer in the range 1 through

1000. If you have not configured PAP or CHAP, ignore this field.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.43

Parameter: Convergence Timer

Path: Protocols > PPP > Interfaces > Lines

Default: 300 (seconds)

Range: 1 through 5000 (seconds)

Function: Limits the amount of time PPP attempts to negotiate a dial-up connection. If the

timer expires, the connection is dropped. This parameter is valid only for

switched PPP interfaces.

Instructions: Accept the default value, 10 (seconds), or enter an integer in the range 1 through

1000.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.44

Parameter: Magic Num Disable

Path: Protocols > PPP > Interfaces > Lines

Default: Enable

Options: Enable

Disable

Function: Disables the loopback test that the peer normally performs as part of its network

integrity checking. The loopback test ensures that a peer is talking to the

network, not to itself.

Instructions: Accept the default value, Enable, unless you are testing the connection. After

disabling this parameter, you must explicitly set it to Enable to reenable

loopback checking.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.45

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 151 152

Sin comentarios

Avaya Configuring PPP Services Manual de usuario Pagina 127