Avaya Configuring PPP Services Manual de usuario descargar pdf (Pagina 103)

PPP Parameters

308639-14.00 Rev 00

A-3

Parameter: IP Enable

Path: Protocols > PPP > Interfaces

Default: If you enable IP support when you configure PPP on this interface, this

parameter is automatically set to Enable. Otherwise, the default is Disable.

Options: Enable

Disable

Function: Enables or disables the network control protocol for IP.

This parameter does not enable or disable IP routing services for the

interface; it affects the network control protocol for IP. However, disabling

the network control protocol for IP stops IP traffic from being routed over

this interface.

Instructions: To stop IP traffic from being routed over this interface, set this parameter to

Disable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.12

Parameter: OSI Enable

Path: Protocols > PPP > Interfaces

Default: If you enable Open Systems Interconnect (OSI) support when you configure

PPP on this interface, this parameter is automatically set to Enable. Otherwise,

the default is Disable.

Options: Enable

Disable

Function: Enables or disables the network control protocol for OSI.

This parameter does not enable or disable OSI routing services for the interface;

it affects the network control protocol for OSI. However, disabling the network

control protocol for OSI stops OSI traffic from being routed over this interface.

Instructions: To stop OSI traffic from being routed over this interface, set this parameter to

Disable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.13

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 151 152

Sin comentarios

Avaya Configuring PPP Services Manual de usuario Pagina 103