Avaya Configuring PPP Services Manual de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 152
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
Customizing PPP
308639-14.00 Rev 00
3-5
Defining an IPX Network Number and Node Number for a Remote Peer
Site Manager lets you specify an IPX network number and an IPX node number
that you want the remote peer to use. The interface uses these numbers in its NCP
negotiations.
Enter the IPX network number for the remote peer to use. There is no default
value; you can enter any unique, valid, unreserved IPX network number,
consisting of a string of up to eight hexadecimal characters. The value 0xffffffff is
invalid.
The negotiated network number must be unique. It cannot be a previously
assigned network number. Note that both sides of the link do not have to have the
same network number; PPP negotiates the higher of the two numbers. In addition,
the negotiated IPX network number can be 0 on both sides of the link. In this case,
IPX defines the link’s network number.
Be aware that the value for this parameter depends on the IPX configuration for
this interface. For information about IPX and PPP interaction, refer to Configuring
IPX Services.
If you want to specify an IPX node number for the remote peer to use, enter it
here. The interface uses this IPX remote node number in its NCP negotiations.
To specify an IPX network number and remote node number, do the tasks in the
following table.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose
PPP
. The Interfaces menu appears.
2. Choose
Interfaces.
The Interfaces window opens.
3. Set the
IPX Network Number
.
(See page A-8.)
4. Set the
IPX Remote Node Number
.
(See page A-9.)
5. If you have no other Interface parameters
to configure, click on
OK
. Otherwise,
continue with the Interface configuration.
The Configuration Manager window
appears.
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 151 152

Comentarios a estos manuales

Sin comentarios