Avaya BCM 4.0 Networking Guía de configuración descargar pdf (Pagina 684)

100

101

684 Chapter 68 Virtual Private Networks (VPN)

N0060606N0060606

5 Click the Split Tunnel Network you want to delete.

6 Click Delete.

A confirmation message appears.

7 Click Yes .

IP Address Pool

Remote access users who are using tunneling protocols require two IP addresses to form packets.

The addresses are normally referred to as outer and inner addresses. The outer address, or public

address, is visible when packets are traveling through the public data networks (PDNs). This

address is negotiated between the client and the ISP to which it is connected. BCM does not have

control of this address.

The inner IP address is the one that eventually appears on the private network when the outer

layers of the packet are removed. Therefore, this address must lie within the private network

address space. BCM provides the remote user with the inner IP address during tunnel setup. This

address can come from a defined static IP address for this user account or from an internal address

pool.

When assigning IP addresses for remote users, make sure that no conflicts can occur with IP

addresses already assigned on the private network.

To add an IP address pool

1 Click Configuration > Data Services > IPSec VPN.

2 Click the IP Address Pools tab.

3 Click Add.

The IP Address Pool List panel appears. See Figure 215.

4 Configure the Remote IP Address Pool List settings. Refer to the information in Table 177.

5 Click OK.

1 2 ... 679 680 681 682 683 684 685 686 687 688 689 ... 757 758

Comentarios a estos manuales

Sin comentarios

Avaya BCM 4.0 Networking Guía de configuración Pagina 684

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya BCM 4.0 Networking