Avaya BCM 4.0 Networking Guía de configuración descargar pdf (Pagina 509)

100

101

Chapter 60 Configuring the WAN resources 509

BCM 4.0 Networking Configuration Guide

3 Click the WAN T1 Parameters tab.

The WAN T1 Parameters details panel appears. See Figure 156.

4 Configure the WAN T1Parameters. Refer to the information in Table 13.

Figure 156 WAN T1 parameters

Table 13 WAN T1 parameters

Attribute Value Description

Frame type ESF

SF(D4)

Set the type of framing the T1 line supports.

Use the setting your T1 service provider recommends.

Default: ESF

Line coding B8ZS

AMI

Set the type of encoding used in the T1 line. Use the setting your T1

service provider recommends.

Default: B8ZS

Advanced Settings

Channel rate 56K

64K

Set the data transmission rate for each of the DS0 channels in the T1 line.

Default: 64 K

Clock source External

Internal

Set an internal or external T1 clock source.

For a tandem connection, if one end has the clock source as Internal,

then the other end should have the clock set as external, as the farther

end will supply the clock.

Default: External

Line polarity Normal

Inverted

Set Normal or Inverted line polarity in the T1 line. Select Inverted only if

Line Coding is set to AMI.

Default: Normal

Pulse density Enabled

Disabled

Control whether the DSU/CSU maintains the minimum level of 1s on the

line for AMI encoding.

Default: Disabled

Channels <check box> Create a list of T1 channels used when using fractional T1. Your T1

service provider can give you this information.

Default: All

1 2 ... 504 505 506 507 508 509 510 511 512 513 514 ... 757 758

Comentarios a estos manuales

Sin comentarios

Avaya BCM 4.0 Networking Guía de configuración Pagina 509

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya BCM 4.0 Networking