Avaya Business Communications Manager 5.0 - Fault and Performance Management Manual de usuario descargar pdf (Pagina 55)

Telephony metrics monitoring 55

Nortel Business Communications Manager 5.0

Fault and Performance Management

NN40170-701 01.01 Standard

August 2009

5 Click Reset Statistics to reset new settings.

The system displays a message indicating that this will remove all of the

statistics.

6 Click OK to erase all the current statistics and begin collecting statistics

again.

--End--

Checking the CSU alarms

Check the CSU alarms to view the active loss of signal (LOS), out of frame

(OOF), remote alarm indicator (RAI), or alarm indication signal (AIS) alarms.

Procedure steps

Step Action

1 Select Administration > Telephony Metrics > Trunk Module Metrics.

2 Select a module.

3 Click the CSU Alarms tab.

The display shows all the active alarms of the types LOS (loss of signal),

OOF (out of Frame), RAI (Remote alarm indicator), or AIS (Alarm indication

signal).

--End--

Checking carrier failure alarms

Check carrier failure alarms to view a history of alarms for a module. CFA

types reported by the BCM can be mapped to CFAs defined in TIA-547A and

TR62411 as shown in the table below.

Procedure steps

Step Action

1 Select Administration > Telephony Metrics > Trunk Module Metrics.

2 Select a module.

3 Click the CSU Alarm History tab.

The display shows LOS (loss of signal), OOF (out of Frame), AIS (Alarm

indication signal), and RAI (Remote alarm indicator).

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 69 70

Sin comentarios

Avaya Business Communications Manager 5.0 - Fault and Performance Management Manual de usuario Pagina 55