Avaya Business Communications Manager 5.0 - Fault and Performance Management Manual de usuario descargar pdf (Pagina 38)

38 System metrics monitoring

Nortel Business Communications Manager 5.0

Fault and Performance Management

NN40170-701 01.01 Standard

August 2009

The UPS Status panel tracks occurrences of alarms pertaining to UPS

operation. These alarms are also sequentially viewable in the Alarm panel.

The metrics correspond to alarms in the BCM and appear in the alarm panel

as well.

Accessing the UPS status

Complete this procedure to verify the status of the UPS before you boot up the

BCM system.

Procedure steps

Step Action

1 Click the Administration tab.

2 In the Navigation tree, click System Metrics >UPS Metrics > Status tab.

The status of the UPS appears. The UPS Status panel confirms that a UPS

is connected including model and serial number, its current status, and

provides a read out of the current values. Additionally, an indication is given

whether the value is within the normal range or not.

3 To check the metrics of the UPS, click the Metrics tab.

The metrics information appears in the panel.

--End--

NTP metrics

Using Network Time Protocol (NTP), you can configure the time on the BCM

indirectly from a single time server. NTP is a network protocol designed to

synchronize the clocks of computers over an IP network. The NTP Metrics

provide an overview of the integrity of the NTP time source. If the BCM clock

control has not been configured to use NTP (Configuration>System>Date &

Time), then the NTP Metrics panel displays no data.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 69 70

Sin comentarios

Avaya Business Communications Manager 5.0 - Fault and Performance Management Manual de usuario Pagina 38