Avaya R2MFC Guía de configuración descargar pdf (Pagina 63)

Chapter 5 R2MFC MBM maintenance 63

Digital Mobility System Installation and Configuration Guide

6 Record the switch settings from the old module.

7 Set the DIP switches on the new module to match the settings you recorded in the previous

step.

8 Refer to “Installing an R2MFC MBM” on page 32 to install the module in the media bay.

9 Refer to “Reconnecting the equipment” on page 33 to restore the system to operation.

Upgrading firmware

Normal installation does not require firmware download. A firmware upgrade can be required at

some point to incorporate bug fixes or new features.

The following items are required for a firmware download:

• firmware load file

• PC connected to the RS232 serial port of the R2MFC MBM through COM1

• PC program delivered by the supplier: Bload1.exe for COM1

Figure 23 on page 63 provides an overview of the process for upgrading R2MFC MBM firmware.

Figure 23 Upgrading firmware overview

Perform the following steps to download the firmware the R2MFC MBM:

Note: The version of the firmware, running on an installed R2MFC MBM, is found by

using the

Fwversion command in the INfo directory of the CLI. See Chapter 6,

“Command Line Interface (CLI)” for details on the CLI.

Firmware Upgrade

Required

Copy the firmware load

and PC program files to

Connect PC to the

R2FMC MBM

Open a Hyper-terminal

session to connect to

R2FMC MBM

Disable links

Prepare R2FMC MBM for

upload

Verify the version of

new firmware

Check the module to see

if it is working properly

Disconnect PC from

R2FMC MBM

Is f irmware

corrupted?

Upload new firmware

file

Yes

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 105 106

Comentarios a estos manuales

Sin comentarios

Avaya R2MFC Guía de configuración Pagina 63

Comentarios a estos manuales