
Chapter 9: Deployment prerequisites
This section describes the prerequisites for Avaya 3100 Mobile Communicator and Avaya Communication
Server 1000 (Avaya CS 1000) integration.
• Establishing the Avaya CS 1000 and Avaya 3100 Mobile Communicator system baseline on
page 59
• Checking the Avaya CS 1000 release from Element Manager on page 61
• Checking the Avaya CS 1000 release from the command line on page 62
Establishing the Avaya CS 1000 and Avaya 3100 Mobile
Communicator system baseline
To successfully integrate voice services, you must first establish the system baseline for the
Avaya CS 1000 and Avaya 3100 Mobile Communicator systems so that the systems are
configured and working in a stand-alone environment. Use the following table to complete
system baselines before integration.
Task Reference Comments
Avaya CS 1000
The Network Numbering
Plan is implemented.
Dialing Plans: Description,
NN43001-283
Are you using a Unified
Dialing Plan (UDP) or a
Coordinated Dialing Plan
(CDP), or both?
Avaya CS 1000 software is
Release 5.5. or higher
To check the release level,
see Checking the Avaya CS
1000 release from Element
Manager on page 61 or
Checking the Avaya CS 1000
release from the command
line on page 62.
Basic installation, setup, and
configuration of the Call
Server components are
complete.
Avaya Communication
Server 1000M and Meridian
1: Large System Installation
and Commissioning,
NN43021-310 Avaya
Communication Server
1000S: Installation and
Deployment Guide October 2010 59
Comentarios a estos manuales