
Figure 24: SIP Gateway settings
5. Complete the following for the primary server.
• Primary Proxy or Re-direct (TLAN) IP address: Enter the TLAN IP address
of the server that hosts the NRS designated as the Primary Re-direct Server.
• Supports Registration: Select to have the SIP Gateway register with the
Primary NRS.
Configuring the SIP URI to NPI/TON mapping
The SIP URI to NPI/TON mapping is used as a translation of a signaling request between the
SIP Trunk Gateway and the NRS.
When using SIP, calls are routed based on SIP URLs instead of numbers. The SIP URI Map
is used to identify the SIP domains to use for routing.
Use this procedure to configure the SIP URI Map settings in Element Manager.
Avaya CS 1000 configuration for client support
110 Deployment Guide October 2010
Comentarios a estos manuales