
The Domain name is case sensitive and must match the Service Domain name
configured in the NRS.
10. If authentication is enabled in the NRS, configure the SIP Gateway Endpoint Name
and SIP Gateway Authentication Password to match the Gateway Endpoint
name and Gateway Endpoint authentication password used by the SIP Redirect
Server.
11. Click Save and Transfer.
Configuring the SIP Gateway settings
Perform the following procedure to configure the SIP Gateway settings.
1. Log on to Element Manager.
2. Select System - IP Network - Nodes: Servers > Media Cards from the Element
Manager navigator.
3. On the Node Configuration page, click Edit.
4. On the Edit page, select SIP GW Settings to expand the section.
Configuring the SIP Gateway settings
Deployment Guide October 2010 109
Comentarios a estos manuales