
Upgrade commissioning
If the database restore fails, you need to recommission the system using the parameters saved
in Recording the Release 3.0 configuration parameters on page 141.
Prerequisites
• You must be logged into the server as nortel. For more information, see
Accessing the
server command line as nortel on page 159.
• You must know the root password to perform the following procedure.
• You must have all the information recorded in the tables in
Release 3.0 system
configuration job aid on page 142.
Use the configuration parameters, which you captured in Release 3.0 system
configuration job aid on page 142, to commission the Release 3.1 system by following
the procedures in Commissioning on page 74.
Upgrading for a Service Upissue
This section describes the upgrade due to an Avaya 3100 Mobile Communicator Gateway
Service Upissue (SU). SUs are downloaded from the Web using FTP, and a CD is not required.
A Maintenance Release (MR) is similar to an SU, but the update is not generally available, and
you require a CD.
Upgrading the Avaya 3100 Mobile Communicator system software
from CD
Use this procedure to perform maintenance patches to the system from a CD. Do not use this
procedure to perform upgrades from release to release.
Prerequisites
You must know the root password to perform the following procedure.
Follow the steps in Installation on page 72, selecting the upgrade option when
prompted.
Upgrading the Avaya 3100 Mobile Communicator Gateway software to a new software release
Deployment Guide October 2010 147
Comentarios a estos manuales