Avaya 3100 Mobile Communicator Deployment Guía de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 172
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
Parameter Description Example
dialplan. Can be the last digit of the mobility
prefix with the User’s ESN DN.
L1 DN prefix not required
Authentication
enabled
Determines if Authentication is required. Authentication on
Authentication
password
The password for authentication xxxxxxxx
For information about SIP Gateway configuration, see IP Peer Networking Installation and
Commissioning, NN43001-313.
SIP Trunk configuration
You must configure the communication server SIP trunk that receives Avaya 3100 Mobile
Communicator Gateway calls, on behalf of mobile client users, to ESN5. You must configure
all associated Virtual trunks to WNK/WNK. The mobile client requires these settings so that
calls to the Public Network display the correct Calling Line ID (CLID) and have the same
Network Class of Service (NCOS) as a call from the associated communication server
telephone.
The output for the WNK/WNK Virtual Trunk, from Element Manager or a terminal window, looks
like this:
DES IPTIE
TN 081 0 00 02 VIRTUAL
TYPE IPTI
CDEN 8D
CUST 0
XTRK VTRK
ZONE 000
TRK ANLG
NCOS 0 RTMB 10 3
CHID 3
TGAR 0
STRI/STRO WNK WNK
SUPN YES
AST NO
IAPG 0 *
CLS UNR DIP WTA LPR APN THFD XREP
P10 NTC MID
TKID *
AACR NO
Important:
All of the SIP Virtual Trunks must be configured to WNK WNK.
The output for the ESN5 Route Data Block, from Element Manager or a terminal window, looks
like this:
Interworking requirements with CS 1000
34 Deployment Guide October 2010
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 171 172

Comentarios a estos manuales

Sin comentarios